Adhi Vinayagar Enterprises

We are highly acknowledged organization engaged in presenting a remarkable range of Airmate Desiccant Dryer.

Description:

Principle of Operation A heatless twin tower desiccant dryer operates by removing moisture through adsorption onto a granular desiccant bed from the air supply. As compressed air flows up through a packed bed of desiccant in tower 1, water vapor is adsorbed. Meanwhile tower 2 is rapidly depressurized and dry purge air from the outlet of tower 1 is fed through a purge valve, expanded to near atmospheric pressure, and counter-flowed down through tower 2 to effect the regeneration of its granular desiccant bed. When the desiccant in tower 1 becomes saturated with water vapor the air supply is switched back to tower 2 after it has been re-pressurized and the cycle continues.

As default, all HLD models above 5X are provided with the following options.

 
Dew Point Stretch Cycle:

It stretches the moisture loading time of the desiccant bed by increasing the drying time. A dew point meter at the outlet with a required dew point setting provides the signal for the stretch cycle. This reduces the purge air in accordance to the air flow and dew point chosen. The purge occurs for the pre-programmed time during this time. Note - Dew point meter not in dryer scope.

Purge Optimizer:

It reduces the percentage of regeneration flow based on the front panel setting. It has 4 options 40%, 60%, 80% & 100% purge optimization cycles respectively. The settings correspond to flow or moisture load through the dryer. Separate LED Indicators for Tower Status, Purge Optimizer & Condensate Drain

In order to keep pace with the never-ending demands of customers, we are involved in offering a wide range of Airmate Refrigeration Air Dryer.

Description:

• Elgi thinks long run to make the earth and the environment a safer and a better place to live. As per international protocol, Elgi uses ozone-friendly R 134A gas as the refrigerant which has zero ozone-depletion potential
• Refrigerant gas / Liquid
• Refrigerant gas
• Hot refrigerant gas
• Cold refrigerant liquid
• Expanded refrigerant liquid
• Air - to heat exchanger
• Air - to - refrigerant heat exchanger
• Integrated water separator
• Liquid separator
• Regulation device
• Refrigerant compressor
• Refrigerant condenser
• Refrigerant filter
• Thermostatic expansion valve
• Incoming hot wet air
• Cool wet air
• Outgoing dry air

An air dryer removes the vapor from the moist compressed air delivered by the compressor and prevents it from causing the pneumatic equipment to fail.

An air dryer removes the vapor from the moist compressed air delivered by the compressor and prevents it from causing the pneumatic equipment to fail.

In order to keep pace with the never-ending demands of customers, we are involved in offering a wide range of Airmate Refrigeration Air Dryer.

The advanced design features and superior build quality of the EGRD air dryers ensure high reliability during operations. These air compressor air dryers are also equipped with internal thermal overload switch for enhanced product safety.

The condensate sensing type automatic drain valve is the latest advancement in drain valve technology. Instead of operating through cycle timer, these valves sense the condensate level for activation, ensuring absolutely no loss of compressed air and hence enormous energy saving. These drain valves are highly efficient and reliable. They can be fitted directly on the equipment simply by replacing the manual drains.

The electronic level control ensures proper draining of condensate and avoids unnecessary loss of air.

All the functions of the valve are accurately indicated by the LED display.

Test switch (or) manual drain allows function test at anytime.

Intelligent Controller detects valve, probe failure and acts accordingly.

Noise free, as air is not discharged.